How much do you know about panel furniture? Many consumers have misunderstandings when using panel furniture, resulting in serious damage to the final furniture. Here, Stanley wardrobe tells you 7 precautions for using panel furniture
How much do you know about panel furniture? Many consumers have misunderstandings when using panel furniture, resulting in serious damage to the final furniture. Here, Stanley wardrobe tells you seven precautions for using panel furniture:
first, when moving furniture, do not drag and pull hard
when moving for a short distance, do not drag or pull hard, but remove the items in the cabinet before moving. The whole wardrobe should be lifted and placed gently to avoid loosening or fracture of the tripod and wedge structure; The placement shall be stable to prevent swinging
ask professionals for help when disassembling or handling furniture from a long distance. When handling, there should be outer packaging to prevent bumps. Handle and handle with care; When reinstalling, the doors and drawers should be properly adjusted to ensure that the cabinet wall will not be rubbed when opening and closing, and can be used as usual
second, avoid opening and closing furniture doors, drawers and moving doors too hard
do not open and close the door too hard, push and pull the drawer, or move the door, so as to prevent the structure from loosening or damaging the contact surface
there are stress devices on the concealed door hinge of the lockcard wardrobe and the guide rail of the drawer, which can buffer some energy when you close the door quickly and vigorously, but there will also be a limit
the door of Laoka wardrobe is equipped with anti-collision rubber sleeve, which can absorb part of the impact force. However, because the door leaf itself has a large mass, if a large external thrust is added, the anti-collision rubber strip can not play a good protective role
third, do not place furniture in direct sunlight to avoid the exposure of furniture to the sun
don't expose the furniture to the sun. If the sun can shine indoors for a long time, especially in summer, pay attention to the sun shading to prevent the board from cracking and deformation due to excessive dryness, surface film falling off, finish fading, etc; If the weather is too dry, you can gently wipe the table with a slightly wet cloth to prevent warping and cracking
IV. do not put furniture in a cold and damp place to ensure ventilation and dryness of furniture
don't put the furniture in a too wet place, and avoid soaking in all kinds of liquids for a long time, so as to prevent the wood from swelling and mildew when wet, the fabric from foaming and degumming, and the drawer from opening and closing smoothly. In southerly days or rainy summer, if the indoor air humidity is too high, desiccant can be placed in the cabinet
v. don't wash furniture with a lot of water
don't use a lot of water to wash the furniture. You can use a slightly wet towel to wipe it, or use a special furniture detergent or maintenance agent. It's best to spray the special furniture detergent or maintenance agent on the clean cotton cloth, and then gently wipe away the dust and stains
VI. avoid placing heavy objects on the countertops of furniture
do not place heavy objects on the countertops of wine cabinets, bookcases, wardrobes and other furniture for a long time. When placing objects, please handle them with care and do not use too much force to avoid deformation of plates and pillars
VII. Avoid placing corrosive liquids on furniture countertops
do not put high concentration alcohol, banana water and vinegar on the countertop of panel furniture (according to the chemical property of melamine film, it is very slightly soluble in alcohol, and there is no test temporarily, so it is also added in case, banana water is Tianna water), so as not to accidentally sprinkle it on the countertop and corrode the material surface; Do not put high-temperature objects such as furnaces and heaters on the table to prevent burning the surface materials